Cisco 15454-MRP-L1-34.2= Datenbogen

Seite von 14
 
Cisco Systems, Inc.  
All contents are Copyright © 1992–2004 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement. 
Page 1 of 14 
 
 
Figure 1 
Cisco ONS 15454 SONET/SDH 
MSTP 2.5-Gbps Multirate 
Transponder Cards 
  
 
  
DATA SHEET 
2.5-GBPS MULTIRATE TRANSPONDER CARD FOR THE CISCO ONS 15454 
MULTISERVICE TRANSPORT PLATFORM 
  
The Cisco
®
 ONS 15454 Multiservice Transport Platform (MSTP) support for a 2.5-
Gbps multirate transponder card simplifies the integration and transport of many 
service types, including Enterprise Systems Connection (ESCON), Fibre Channel, 
Gigabit Ethernet, SONET/SDH (to 2.5 Gbps), and video interfaces and services 
into enterprise as well as metropolitan (metro) and regional service provider 
networks. 
BACKGROUND 
Metro transport networks must support a wide variety of service demands, from low-rate DS-1/E-
1, DS-3/E-3, 10/100BASE-T, OC-3/STM-1, etc., to higher-rate OC-12/STM-4, Gigabit Ethernet, 
OC-48/STM-16, and 10 Gigabit Ethernet services. In the recent past, SONET add/drop 
multiplexers (ADMs) provided the services platform to aggregate and transport services up to 
OC-48/STM-16, where metro dense wavelength-division multiplexing (DWDM) platforms were 
designed for optical signals from OC-3/STM-1 to OC-192/STM-64, including Gigabit and 10 
Gigabit Ethernet. Unfortunately, deploying multiple platform types, including metro DWDM and 
SONET ADMs, to support the wide variety of services is not cost effective for many service 
provider and enterprise networks. Thus, a more cost-effective networking solution is required to 
enable the delivery of all services, from lower-speed DS-1/E-1s to higher-speed 10 Gigabit 
Ethernet and OC-192/STM-64s.  
PRODUCT OVERVIEW 
The 2.5-Gbps multirate transponder (2.5G transponder) card (Figure 1) provides the capability to transport a wide variety of service types from 
155 Mbps to 2.48 Gbps, including services such as ESCON, SONET OC-3 through OC-48, SDH STM-1 through STM-16, Gigabit Ethernet, 1- 
or 2-Gbps Fibre Channel, and other services, over a 100-GHz, ITU-compliant wavelength, with 50-GHz wavelength stability for future 64-
channel operation. The 2.5G transponder card architecture contains a single client interface that is mapped to a single-line DWDM interface, 
without accessing the Cisco ONS 15454 shelf cross-connect fabric.  
The interface to the client is via a variety of Small Form-Factor Pluggable (SFP) optics modules, enabling a wide service mix, including 
ESCON, OC-3/STM-1, OC-12/STM-4, OC-48/STM-16, Gigabit Ethernet, 1-Gbps Fibre Channel/FICON, 2-Gbps Fibre Channel/FICON, as 
well as high-definition television (HDTV), D1/SDI video, DV6000, and different fiber types (single- and multimode), wavelengths (850 and 
1310 nm), and fiber reach (short reach/intra-office, intermediate reach/short haul, etc.). The SFP optics modules are equipped with LC 
connectors to enable high-density placement on the card.