Cleveland Medical Devices Inc. 0007 Benutzerhandbuch

Cleveland Medical Devices Inc. 

                                                             BioRadio 110 User Guide

 

                                                                                                                                                    7 

 
To test the Transmitter Unit, you have the option of connecting the Transmitter to the 
Programmer/Test Pack to obtain a stable test signal of known (approximate) amplitude 
and frequency; or to the Sensor Cable to obtain actual physiological signals. For quicker 
setup we suggest using the Programmer/Test Pack first. 
 

 

The batteries need to be inserted into the Transmitter the first time you use your 
BioRadio Transmitter. 
 
1. Open the Transmitter case using the screwdriver provided in your BioRadio kit by 

removing the screw on the back of the Transmitter. 

2. Lift the battery cover off of the Transmitter. 
3. Insert two AAA alkaline batteries, making sure poles are aligned properly. 
4. Secure the cover by replacing the screw. 
 

1. Plug the ribbon cable on the Programmer/Test Pack into the Transmitter’s 26-pin 

port.  The ribbon should click into the Transmitter port when connected properly. 

2. Proceed to Chapter 3 to begin viewing and recording signals. 

392-0000rev1.pub 
page 7

Thursday, November 12, 1998 15:39