Cleveland Medical Devices Inc. 0087 Benutzerhandbuch
Cleveland Medical Devices, Inc.
4415 Euclid Avenue, Cleveland, Ohio 4415 , tel: 1-877-clevemed, www.clevemed.com
11
Chapter 2: Setting Up the BioRadio 150
Installing the BioRadio Capture Lite Program
1. Insert the BioRadio Capture Lite installation CD-ROM into your computer’s CD-
ROM drive
2. Double-click on the BioRadio Capture Lite Installer program
3. Follow the on-screen prompts to install the Software
4. Once the software has been installed, start the BioRadio Capture Lite Software
Starting the BioRadio Capture Lite Program
• Click on the Start Menu
• Point to Programs
• Point to the BioRadio Capture Lite folder
• Click on BioRadio Capture Lite
The software is ready to be used. When the hardware hookup is done, you can start data
acquisition by pressing the Start button.
Installing the BioRadio 150 Hardware
1. Remove User Unit and Computer Unit from Starter Kit case.
2. Insert 2 AA batteries in the User Unit. Turn on the BioRadio 150 to make sure the
green LED lights indicating that the device has not been damaged during shipping.
Turn off.
3. Attach sensor(s) to the body. Many sensors can be used with the BioRadio 150. The
starter kit comes with EEG and EKG types of sensors. Final choice of the sensors
depends on the User’s application.
4. Plug in the sensor lead wire into one of the User Unit ports (check chapter 1 – User
Unit) and turn the device ON. The green LED should come on. If the LED is
flashing then the batteries are not new and need replacement.
5. Plug the large end of the USB data cable into your computer’s USB port. Plug the
small end of the USB cable into the Computer unit.
6. The system is ready for use.