Novatel Wireless NRM-MG301 Benutzerhandbuch
Using mobile PhoneTools
13
Revision 1.1 900023376
Configuring the Modem
The first time that you launch mobile PhoneTools, the following alert will be displayed.
This alert means that you must plug the modem into your PC and configure it before you can
continue.
continue.
To configure the modem:
1.
Click OK on the alert box to search for the modem. The Searching the modem... window
is displayed. Wait several moments for the modem to be found.
is displayed. Wait several moments for the modem to be found.
2.
Click Cancel if the Searching the modem... window does not clear itself after a few
moments. The Device Configuration Wizard program launches. Click Next to continue.
moments. The Device Configuration Wizard program launches. Click Next to continue.
3.
The Select Device window is displayed. Select the Merlin modem. Click Next to continue.
4.
The Detect Driver window is displayed. Ensure that the modem is plugged into the PC while
the software detects the modem’s device driver and displays driver parameters. Click Next
to continue.
the software detects the modem’s device driver and displays driver parameters. Click Next
to continue.
5.
The Device Detection window is displayed and the software detects the modem and
displays some parameters. Click Next to continue.
displays some parameters. Click Next to continue.
6.
The Device configuration is completed window is displayed. Click Finish to close the
Device Configuration Wizard. The mobile PhoneTools virtual phone is placed on your
computer screen.
Device Configuration Wizard. The mobile PhoneTools virtual phone is placed on your
computer screen.
If you have a predefined connection profile to use, you can now click the GPRS Connection
button
to connect to a network. If you do not have any predefined connection profiles,
you need to create a GPRS connection profile before you can connect to a network.