Edimax Technology 9530111503 Benutzerhandbuch
7
Gateway Installation
Follow the instructions below to ensure your camera is properly connected
and ready for setup.
1.
Screw on the included antenna to the product’s gateway unit.
2.
Connect the power adapter to the gateway and to a power supply.
3.
Use an Ethernet cable to connect the gateway’s LAN port to a Wireless
AP/ Router’s LAN port, as shown below.
4.
Wait a moment for the camera to power on. The camera is ready when
the Power LED of the camera displays on or flashing. Please refer to
Gateway LED Status on Page.3.
For cloud service, ensure your
Wireless AP/ Router can access to the
internet.
Wireless AP/ Router can access to the
internet.