Electra Enterprises TC900 Benutzerhandbuch
TC-900 USER GUIDE
1.
Tune your video receiver to 916.5 MHz
2.
Connect power adapter at “Connector A”.
3.
Connect a video source to the transmitter at “Connector B”.
4.
The transmitted picture should now be seen on the monitor.
5.
For best results make sure that the antenna is not
obstructed.
obstructed.
6.
IMPORTANT! Using the TC-900 closer than 10 feet to
the receiver may result in a distorted picture.
the receiver may result in a distorted picture.
S
PECIFICATIONS
F
REQUENCY:
916.5 MHz
STABILITY:
±±±±
10kHz
POWER OUTPUT:
0.75mW, 50 mV/m@3m
CURRENT:
18 mA @ 9V
VOLTAGE:
7 - 14 V DC
VIDEO INPUT:
1 V pk-pk NTSC or PAL
A
B
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS.
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE.
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS.
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE.
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED
THAT MAY CAUSE UNDESIRED OPERATION.
Made in Canada