ADC Telecommunications Inc. F0694-011 Benutzerhandbuch

Help Hot Line (U.S. only): 1-800-530-9960

7-11

D-620616-0-20 Rev D

CONFIDENTIAL

Fusion Wideband Installation Procedures

The following procedures assume that the system is installed and programmed.

• Interfacing the Fusion Wideband Main Hub to an RF Source . . . . . . . . . . . . . 7-46

• Connecting a Single Fusion Wideband Main Hub to an RF Source . . . . . 7-46

• Connecting a Fusion Wideband Main Hub to a Roof-top Antenna . . . . . . 7-50

• Connecting Multiple Fusion Wideband Main Hubs to an RF Source . . . . 7-51

• Connecting Multiple Wideband Main Hubs to a Duplex Repeater or BTS 7-54

• Connecting Contact Alarms to a Fusion Wideband System . . . . . . . . . . . . . . 7-56

• Alarm Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-57

• Alarm Sense . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-60

• Alarm Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-62

• Alarm Monitoring Connectivity Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-63

• Direct Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-63

• Modem Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-64

• 100 BASE-T Port Expander Connection . . . . . . . . . . . . . . . . . . . . . . . . . . 7-73

• POTS Line Sharing Switch Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-74

• Ethernet LAN Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-76

• SNMP Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-77

7.4.1

Installing a Fusion Wideband Main Hub

CAUTION: Install Fusion Wideband Main Hubs in indoor loca-
tions only.

Installing a Fusion Wideband Main Hub in a Rack

The Fusion Wideband Main Hub (2U high) mounts in a standard 19 in. (483 mm)
equipment rack. Allow clearance of 76 mm (3 in.) front and rear, and 51 mm (2 in.)
on both sides for air circulation. No top or bottom clearance is required.