Brady Corporation BC1000 Benutzerhandbuch
Censys: UHF Reader
Censys User Guide March 2017 Version 1.0
Configuration Procedures
Before using the product determine the appropriate configurations based on your needs.
Connecting Reader
Connect the reader to a power source
Using a computer or mobile device, find the
“CenSys” SSID and connect to the wireless network.
“CenSys” SSID and connect to the wireless network.
Once connected, open a web browser
The following prompt should appear in your web
browser
Enter your wireless network name, select the
security, and enter the password
security, and enter the password
The “Broker URL” is set to the default broker, and
unless you are using your own software, this broker
URL does not need to be changed.
unless you are using your own software, this broker
URL does not need to be changed.
Enter your Site ID. Site ID will be provided within 48
hours of system purchase
hours of system purchase
Configuring reader
Place the reader in the intended final mounting position.
Remove any large objects, metal, or human obstructions
from a 10’ radius of the reader unit.
from a 10’ radius of the reader unit.
Plug in or connect power to the reader unit.
Stand back at least 8 feet from the reader (the reader
will be detecting the natural state of environment)
will be detecting the natural state of environment)
The LED light on the reader will flash red 10 times, hold
steady red, and then turn blue confirming it’s connected
to your WiFi.
steady red, and then turn blue confirming it’s connected
to your WiFi.
Log into the CenSys software at [insert URL here]. Your
login will be provided to you via e-mail.
login will be provided to you via e-mail.
Once logged in, on the left, click on Manage, and select
“Assets”
“Assets”
You will see a site named “Home” and on the right you
will see four tabs; Assets, Readers, Un-Assigned Readers,
and Settings.
will see four tabs; Assets, Readers, Un-Assigned Readers,
and Settings.