Smart Communications Ltd SCU99BL Benutzerhandbuch

 

4 

 
 SCV08 and SCU08 are 8-Channel, State of the Art, and Synthesized Portable FM 
Transceivers.  The SCV08 operates in the 136-174 MHz VHF band.  The SCU08 
operates in the 450-480 MHz UHF band. 
 
The SCU08 operates in the UHF band with a 4 or 1 Watt RF power output.  The SCV08 
operates in the VHF band with a 5 or 1 Watt RF power output. 
The Unit features the following: 
 Built In DCS Decoder/Encoder 
 Built In CTCSS Tone Decoder/Encoder 
 Busy Channel Lockout Per Channel 
 
The Transceivers can store up to 8 channels of programmed information without the need 
for a Battery back up.   
 
The radio has been programmed by the dealer.  A list of channel information and radio 
configuration should be available from the dealer 
 
Optional Accessories 
 
 RSC-21-7- Drop in Rapid Charger 
 BPSC1- 1000 mAH rechargeable Ni-Cad Battery 
 SMSC -External Speaker/Microphone 
 LCSC08-Leather Carrying Case 
 

 
BATTERY INSTALLATION AND REMOVAL 
 
A. To attach the battery, align the grooves on the battery case with those on the Unit 

and slide it into place until a “snap” is heard indicating that the battery is locked 
into position. 

 
B. To remove the battery, press UP on the Release Button and slowly pull the battery 

OFF. 

 
ANTENNA INSTALLATION AND REMOVAL 
 
 The SCV08 uses a RDSCV antenna; the SCU08 uses a RDSCU antenna. 
 
A. To install the antenna, carefully place it on the TNC type antenna connector located 

on the top of the radio.  Turn the antenna clockwise until it is firmly attached. 

 
B. To remove the antenna, turn the antenna counter-clockwise until it can be lifted 

away from the radio.