Sea Air and Land Communications 15855 Benutzerhandbuch
5
Compliance
The module is limited to OEM installation in mobile or fixed applications ONLY.
A separate approval is required for all other operating configurations, including portable
configuration with repect to FCC 47 CFR 2.1093 and different antenna configurations. It is the
responsibility of the OEM to gain type approval for the host product.
The equipment integrator is responsible for ensuring that the end-user has no manual instructions to
remove or install the module.
The 15-85-0450 does not require any further shielding and therefore can be fitted into any host
product. The end-users of the product must be provided with transmitter/antenna installation
requirements and operating conditions to satisfy RF exposure compliance by the integrator. The RF
output is via a 50Ω BNC connector.
The labelling of the finished product must include either “Contains Transmitter Module FCC ID:
O8715855" or “Contains FCC ID: O8715855".
FCC RF Exposure Requirements
The external ¼ wave dipole antenna used with this module must be installed to provide a separation
distance of at least 0.47 m from all persons, and must not transmit simultaneously with any other
antenna or transmitter, except in accordance with FCC multi transmitter product procedures
A separate approval is required for all other operating configurations, including portable
configuration with repect to FCC 47 CFR 2.1093 and different antenna configurations. It is the
responsibility of the OEM to gain type approval for the host product.
The equipment integrator is responsible for ensuring that the end-user has no manual instructions to
remove or install the module.
The 15-85-0450 does not require any further shielding and therefore can be fitted into any host
product. The end-users of the product must be provided with transmitter/antenna installation
requirements and operating conditions to satisfy RF exposure compliance by the integrator. The RF
output is via a 50Ω BNC connector.
The labelling of the finished product must include either “Contains Transmitter Module FCC ID:
O8715855" or “Contains FCC ID: O8715855".
FCC RF Exposure Requirements
The external ¼ wave dipole antenna used with this module must be installed to provide a separation
distance of at least 0.47 m from all persons, and must not transmit simultaneously with any other
antenna or transmitter, except in accordance with FCC multi transmitter product procedures