Given Imaging Limited CAPDH-2 Benutzerhandbuch
Know Your PillCam Recorder
PillCam Recorder DR3
67
The PillCam recorder is ready for operation when:
•
the battery is at least 80% charged (eight or more bars displayed on battery icon),
•
it has been removed from the cradle,
•
it is connected to the sensor belt or sensor array.
Controls
Main Display
The main display of the PillCam recorder DR3 displays the relevant information during the different
phases of the capsule endoscopy procedure.
After Initialization (after check-in) and before pairing with the capsule, the recorder display shows the
relevant procedure information data, as follows:
phases of the capsule endoscopy procedure.
After Initialization (after check-in) and before pairing with the capsule, the recorder display shows the
relevant procedure information data, as follows:
After pairing with the capsule, the display shows the relevant procedure information data, as follows:
!
Warning
Never connect the PillCam recorder to the sensor array or the sensor belt while
the PillCam recorder is in the cradle.
Do not use the DR3 cradle for any USB devices except the PillCam recorder
DR3.
Never connect the PillCam recorder to the sensor array or the sensor belt while
the PillCam recorder is in the cradle.
Do not use the DR3 cradle for any USB devices except the PillCam recorder
DR3.
Battery charge level
Capsule signal level
Status line
Patient name
Patient ID
Capsule type
Last Regimen instruction
Audio alert control
Icon to toggle delay
first instruction
first instruction
Recorder status: unpaired
Battery charge level
Capsule signal level
Status line
Patient name
Patient ID
Capsule type
Last Regimen instruction
Audio alert control
Recorder status: paired
Real-Time viewing