Honeywell International Inc. 7400-476 Benutzerhandbuch

Follow these steps to establish a connection for the first time after configuring the settings:

1. Select Launch ActiveSync in the DetectoidPC window.

2. Start ActiveSync on the Dolphin terminal.

Once parameters are configured and saved, you do not need to run DetectoidPC again unless you need to change the 
ActiveSync settings or cold-boot the terminal. 

After you have completed the initial setup  and set the time and date, the Dolphin 7400 terminal is ready to use. Choose the 
IMAGE DEMO or SCAN DEMO to verify that the terminal is operating properly.

To take an image:

1. Touch the <Start> button and tap HHP Demos.

2. Select IMAGE DEMO. 

3. Press the <ON/SCAN> button and the image you take will appear on the terminal’s screen. 

4. Touch <ESCAPE> to go back to the main menu.

To scan a bar code:

1. Touch the <Start> button and tap HHP Demos.

2. Select SCAN DEMO. 

3. Press the <ON/SCAN> button, aim the terminal at a bar code and the red SCAN LED will illuminate. The green SCAN LED 

will illuminate and the terminal will beep when a good scan is obtained. Information about the bar code scanned will appear 
on the screen. 

4. Press <ESCAPE> to exit the demo and return to the main menu.