Honeywell International Inc. CS19A Benutzerhandbuch

6 - 8

example, B2000454657374 will compare the string at the current 
cursor position with the 4 character string “Test.” 
Refer to the 

for decimal, hex and character codes.

EC Check to make sure there is an ASCII number at the current cursor 

position.  The format is aborted if the character is not numeric. 

ED Check to make sure there is a non-numeric ASCII character at the 

current cursor position.  The format is aborted if the character is not 

numeric. 

EF Inserts a delay of up to 49,995 milliseconds (in multiples of 5), starting 

from the current cursor position. Syntax = EFnnnn where nnnn stands 
for the delay in 5ms increments, up to 9999.  This command can only 
be used with keyboard wedge interfaces.

When Data Formatter is turned Off, the bar code data is output to the host as 
read, including prefixes and suffixes. 

You may wish to require the data to conform to a data format you have created 
and saved.  The following settings can be applied to your data format:

Scanned data is modified according to your data format, and prefixes and 
suffixes are transmitted.

Scanned data is modified according to your data format.  If a data format is 
found for a particular symbol, those prefixes and suffixes are not 
transmitted.

Scanned data is modified according to your data format, and prefixes and 
suffixes are transmitted.  Any data that does not match your data format 
requirements generates an error tone and the data in that bar code is not 
transmitted.  If you wish to process this type of bar code without generating 
an error tone, see 

Preliminary Draft