Honeywell International Inc. CS19A Benutzerhandbuch
3 - 6
Scanner LED Sequences and Meaning
Base LED Sequences and Meaning
The base contains a red LED that indicates the status of the unit and veri-
fies its communication with the host system and a green LED that indicates
scanner battery charge condition.
fies its communication with the host system and a green LED that indicates
scanner battery charge condition.
Note: Charging only occurs with external power applied to the charge base
or 12 volt host power.
The table below lists the indication and cause of the LED illumination and
beeps for the CCB01-010BT charge base.
beeps for the CCB01-010BT charge base.
LED Indication
Beeper Indication
Cause
Normal Operation
Red Flash
Red Flash
None
Battery low
Green Flash
1 beep
Successful
communication or linking
communication or linking
Red, blinking
Razz or error tone
Failed communication
Menu Operation
Green Flash
Green Flash
2 beeps
Successful menu change
Red, blinking
Razz or error tone
Unsuccessful menu
change
change
Charge Condition
Charge Status Indicator (Green LED)
Scanner inserted into base
Three flashes
>80% charged
On continuously
30% to 80% charged
Slow flash, 1 second on, 1 second off
<30% charged
Fast flash, 300 mSec on, 300 mSec off
System Condition
System Status Indicator (Red LED)
Power On/System Idle
LED is on
Receiving Data (charge
base only)
base only)
Blink LED for short duration in multiple
pulses. Occurs while transferring data to/
from the RF module or the Host port.
pulses. Occurs while transferring data to/
from the RF module or the Host port.
Base requests status from
its own Bluetooth radio
its own Bluetooth radio
Blink LED once (occurs approx. every 30
seconds)
seconds)
Preliminary Draft