Honeywell International Inc. SF61B-A Benutzerhandbuch

To disconnect from the host, scan the disconnect bar code:

Bluetooth Device Disconnect

Check that the scanner is no longer in the host’s device list. If 
necessary, manually remove the scanner from the list

A host-initiated (Outgoing) SPP connection requires opening the 
Outgoing virtual COM port from your host application (EasySet or a 
terminal emulation program for example).

The advantage of this method is that no Bluetooth association bar 
code is required. However, if the connection with the host application 
is lost, you must reconnect by re-opening the COM port (s.

Before trying to pair and connect your scanner, make sure that:

the scanner is not already trying to establish a Bluetooth 
connection (blinking blue Intermec Ready-to-Work indicator), 
in this case read the 

Bluetooth Device Disconnect bar code:

Bluetooth Device Disconnect

the scanner is not already paired with your Bluetooth device 
using another profile, in this case remove it from your host’s 
list of Bluetooth devices

your host is equipped for Bluetooth communication

the scanner is turned on (if not pull the trigger to turn it on)

Scan the 

SPP Bluetooth device profile configuration code:

Note: By default the SF61B uses the North American keyboard layout. 
See 

 if you are working with a different keyboard 

configuration.