Honeywell International Inc. 7900LUPE Benutzerhandbuch
Dolphin® 7900 Series User’s Guide–
Preliminary
Preliminary
14 - 3
COMM LED
Indicates the status of data transfer between the host device and the Dolphin terminal
COMM LED Color
Indicates that…
Red
Data is being sent from the host device to the Dolphin Mobile Base.
Green
Data is being sent from the Dolphin Mobile Base to the host device.
Orange
Data is being sent at high data rates.
Bottom Panel
RS-232 Serial
Communications
Port
Communications
Port
Power
Supply
Connector
Supply
Connector
Power Supply Connector
Attach a power cable from Hand Held Products to this connector. The Mobile Base can be powered by an external
DC power source between 11 VDC to 48 VDC. To run on vehicle power, you can use the 12 VDC cable or 24 VDC
cable option. The appropriate cable comes with the kit you ordered. The 12 VDC cable can be used with a cigarette
lighter outlet. The 24 VDC, pigtail cable can be used to “hard-wire” into the vehicle power bus.
DC power source between 11 VDC to 48 VDC. To run on vehicle power, you can use the 12 VDC cable or 24 VDC
cable option. The appropriate cable comes with the kit you ordered. The 12 VDC cable can be used with a cigarette
lighter outlet. The 24 VDC, pigtail cable can be used to “hard-wire” into the vehicle power bus.
Verify that the power source is always within the specified range and observe correct input voltage polarity. An improper input
voltage range (above the 48 VDC maximum) or reverse polarity could damage the power conversion circuitry.
voltage range (above the 48 VDC maximum) or reverse polarity could damage the power conversion circuitry.
!