Honeywell International Inc. 950009 Benutzerhandbuch

The following graphic displays the correct ActiveSync Connection Settings on the desktop computer for an RS-232 connection.

Note: You can have the USB connection box checked in addition to the serial cable box without affecting processing. However, 

you would most likely use one or the other.

The Dolphin 9500/9550 terminal is defaulted to support USB communications out of the box.

•

HomeBase with power supply

•

USB Cable

•

ActiveSync v3.7 or above

•

Windows® 98 second edition*, Windows® Me, Windows® 2000, or Windows® XP computer. 

Note: The HomeBase does not support Windows NT® when using a USB connection. This is because Windows NT does not 

support USB. 

*Windows

®

 98 second edition provides full USB support.

Note: You must be using ActiveSync 3.7 or higher.

Complete these steps:

1. Plug in the power supply and connect it to the back of the HomeBase. 

2. Plug the USB cable into the back of the HomeBase.

3. At this point, the hardware is installed and operating. You may need to reboot your PC to complete the installation process.