Honeywell International Inc. MX2702 Benutzerhandbuch

The serial programming commands can be used in place of the programming bar 
codes.  Both the serial commands and the programming bar codes will program 
the IT2020-5.  For complete descriptions and examples of each serial 
programming command, refer to the corresponding programming bar code in 
this manual.

).  The following 

commands can be sent via a PC com port using terminal emulation software.

The following conventions are used for menu and query command descriptions:

parameter A label representing the actual value you should send as part of a 

command.

[

option]

An optional part of a command.

{Data}

Alternatives in a command.

Names of menus, menu commands, buttons, dialog boxes, and 
windows that appear on the screen.

Menu commands have the following syntax (spaces have been used for clarity 
only):

Prefix [:Name:] Tag SubTag {Data} [, SubTag {Data}] [; Tag SubTag {Data}] […] 
Storage

Prefix

Three ASCII characters: SYN M CR  (ASCII 22,77,13).

:NAME:

To send information to the scanner (with the base connected to 
host): SYN M CR :NAME:  

Tag

A 3 character case-insensitive field that identifies the desired menu 
command group.  For example, all RS-232 configuration settings 
are identified with a Tag of 232.

SubTag

A 3 character case-insensitive field that identifies the desired menu 
command within the tag group.   For example, the SubTag for the 
RS-232 baud rate is BAD.

Data

The new value for a menu setting, identified by the Tag and Sub-
Tag.