Adtran BSAP2135 Benutzerhandbuch

The following items are included in your shipment: 

•

Bluesocket 2135 Access Point (BSAP)

•

One plane bracket with hardware

-

Four expansion bolts with washers and nuts

-

Four hex cap screws with washers and lock washers

•

One pole mounting base with hardware

-

One hose strap

-

Four round head screws with washers and lock washers

•

Watertight PoE fitting

•

Grounding cable

The BSAP 2135 provides six N-type antenna connectors (no integrated antennas are included). These 

connectors support two internal 802.11 radios: one 2.4 GHz 802.11b/g/n radio and one 5 GHz 

802.11a/n/ac radio. There are three antenna connectors for each band labeled 2.4GHz and 5GHz. 

For a 

list of supported external antennas, applications, and instructions for maintaining regulatory compliance, refer to 
the 

.

Grounding Point

Watertight
PoE Fitting

Antenna Connectors

By default, DHCP is enabled on the BSAP 2135. 

However, if you need to statically configure the IP address 

or statically configure AP discovery for the BSAP, follow these steps:
1.

Ensure that the BSAP is connected to a controlling computer (using the provided RJ-45 Ethernet cable).

2. Specify that the computer’s TCP/IP setting is On or Enabled by navigating to Control Panel > 

Network Connections and double-clicking the connection of your network interface card. Select 

Internet Protocol (TCP/IP) and select Properties. Then specify that the TCP/IP setting is enabled.

3. Set your PC to a static IP address of 192.168.190.2 with a subnet mask of 255.255.255.0.
4. Next, access the BSAP’s command line interface (CLI) using an SSH client. Open an SSH 

connection using the unit’s default IP address (192.168.190.1) and port 2335 connected to the 

LAN1 port on the BSAP. To access the unit using vWLAN, and for more instructions about CLI 

, available online at

.

More detailed documentation for configuring the BSAP 2135 is provided in the 

, available online at 

This device complies with Part 15 of the Federal Communications Commission (FCC) rules. The 

operation of this device is subject to the following two conditions:

1.

This device may not cause harmful interference.

2. This device must accept any interference received including interference that may cause undesired 

operation.

The software included in the Bluesocket 2135 contains copyrighted software that is licensed under the 

GNU General Public License (GPL). For a list of third-party software and their licenses, go to 

. You can obtain the complete corresponding source code of 

such software components from ADTRAN for a period of three years after our last shipment of this 

product by sending a money order or check for $5 to:

ADTRAN, Inc, P.O. Box 933638, Atlanta, GA 31193-3638
Please write GPL Source for product Bluesocket 2135 in the memo line of your payment.

This offer is valid to anyone in receipt of this information.

8

Copyright © 2018 ADTRAN, Inc. All Rights Reserved.

Quick Start Guide, 61700962F1-13E, June 2018

1