Accton Technology 3CRWE41196 Benutzerhandbuch
44
C
HAPTER
4: A
CCESS
P
OINT
C
ONFIGURATION
To create a list of Wireless computers that can access the Access Point:
opens.
2 Select one or more MAC addresses of the Wireless PCs that you want to
allow to connect to the Access Point.
3 Click Add.
The list on the Connection Control window contains the MAC addresses
of all Wireless PCs that are in range, currently operating, and have the
same Service Area Name/SSID, channel and encryption settings as the
Access Point. You will find this screen easier to use if you set up and make
a note of all of your wireless PC's on your network first. You may also add
the entries manually if you know the MAC address.
of all Wireless PCs that are in range, currently operating, and have the
same Service Area Name/SSID, channel and encryption settings as the
Access Point. You will find this screen easier to use if you set up and make
a note of all of your wireless PC's on your network first. You may also add
the entries manually if you know the MAC address.
To add a MAC address that is not in the list, enter the MAC address in the
appropriate fields. A MAC address consists of 12 characters. Valid
characters are '0-9', and 'A-F'.
appropriate fields. A MAC address consists of 12 characters. Valid
characters are '0-9', and 'A-F'.
Click Close to discard all changes.
Modifying a MAC Address
1 Click on the MAC address to be modified in the table (
2 Modify the MAC address. The MAC address can only be edited manually.
3 Press Apply to accept the changes.
Figure 31 MAC Address Table
Click Close to discard all changes.
Deleting a MAC Address
The connection rights for a Wireless PC listed in the table can be removed
by pressing Delete for that entry in the table.
by pressing Delete for that entry in the table.