Accton Technology WA3001B17 Benutzerhandbuch
S
YSTEM
C
ONFIGURATION
32
Set MAC Filter
In the Set MAC Filter screen, you can decide which wireless
devices are allowed to connect to the access point by adding the
MAC address of allowed clients. Wireless devices that are not in
the table will be denied access.
devices are allowed to connect to the access point by adding the
MAC address of allowed clients. Wireless devices that are not in
the table will be denied access.
Filtering – Choose Enabled to
enable the MAC Filter
(Default: Disabled).
enable the MAC Filter
(Default: Disabled).
Key in the MAC addresses of
Ethernet devices you wish to
allow to associate with the AP.
Ethernet devices you wish to
allow to associate with the AP.
Note: The format is 12 Hexadecimal digits. e.g. 0090D112AF89
Click Add and then click Save to
save the changes.
save the changes.
Otherwise, click Add from File..
to add a previously saved text
file of MAC addresses and click
Save to save the changes.
to add a previously saved text
file of MAC addresses and click
Save to save the changes.
Notes: 1. The table allows you to enter a maximum of 64 MAC
addresses.
2. This table will be blank if the SMC2671W is set the
Ethernet Converter mode since the Ethernet converter
has no clients but is itself the client of an associated
access point.
has no clients but is itself the client of an associated
access point.