Quanta Computer Inc EY8 Benutzerhandbuch

This Class B digital apparatus complies with Canadian ICES-003 and RSS-247. This device complies with 

Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and (2) this device must accept any interference, including 

interference that may cause undesired operation of the device. Exposure of humans to RF fields 

(RSS-102)

The computers employ low gain integral antennas that do not emit RF field in excess of Health Canada 

limits for the general population; consult Safety Code 6, obtainable from Health Canada's Web site at 

http://www.hc-sc.gc.ca/

The radiated energy from the antennas connected to the wireless adapters conforms to the IC limit of the 

RF exposure requirement regarding IC RSS-102, Issue 5.

SAR compliance for body-worn operation is based on a separation distance of 5 mm between the unit and 

the human body. Carry this device at least 5 mm away from your body to ensure RF exposure level 

compliant or lower to the reported level. To support body-worn operation, choose the belt clips or holsters, 

which do not contain metallic components, to maintain a separation of 5 mm between this device and your 

body.

Cet appareil numérique de classe B est conforme à la norme NMB-003 et RSS-247.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables auxappareils radio exempts de 

licence.L'exploitationest autorisée aux deux conditions suivantes:

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doitaccepter tout brouillage adioélectrique subi, même si le brouillage est 

susceptible d'en compromettre le fonctionnement.

Conformité des appareils de radiocommunication aux limites d'exposition humaine aux radiofréquences 

(CNR-102)

L'ordinateur utilise des antennes intégrales à faible gain qui n'émettent pas un champ électromagnétique 

supérieur aux normes imposées par Santé Canada pour la population. Consultez le Code de sécurité 6 

sur le site Internet de Santé Canada à l'adresse suivante : 

http://www.hc-sc.gc.ca/

L'énergie émise par les antennes reliées aux cartes sans fil respecte la limite d'exposition aux 

radiofréquences telle que définie par Industrie Canada dans ldu document CNR-102, version 5.

Déclaration IC d’exposition au rayonnement Cet appareil est conforme aux limites d’exposition DAS 

incontrôlée pour la population générale de la norme CNR-102 d’Industrie Canada et a été testé en 

conformité avec les méthodes de mesure et procédures spécifiées dans IEEE 1528 et IEC 62209. Cet 

appareil doit être installé et utilisé avec une distance minimale de 5 mm entre l’émetteur et votre corps. 

Cet appareil et sa ou ses antennes ne doivent pas être co-localisés ou fonctionner en conjonction avec 

tout autre antenne ou transmetteur.

This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

This device meets the government’s requirements for exposure to radio waves.

This device is designed and manufactured not to exceed the emission limits for exposure to radio 

frequency (RF) energy set by the Federal Communications Commission of the U.S. Government.

The exposure standard for wireless device employs a unit of measurement known as the Specific 

Absorption Rate, or SAR.

 

 

 

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.

DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS

 

 

Pi Go! is the world’s first immersive lifestyle camera for smartphone.  When connecting to a smartphone 

by WiFi, user can preview instant images on smartphone while taking and sharing photos or videos on 

social networks.

The WiFi FW version operates on this device is bcm43438a0.mfg.

The frequency range of this device is 2412-2472MHz.

The max rated power of this device is 18.85dBm.

There is no restriction of frequency band used for this product.

This device has been tested to and conforms to the regulatory requirements of the European Union and 

has attained CE Marking. The CE Mark is a conformity marking consisting of the letters “CE”. The CE 

Mark applies to products regulated by certain European health, safety and environmental protection 

legislation. The CE Mark is obligatory for products it applies to: the manufacturer affixes the marking in 

order to be allowed to sell his product in the European market.

 

This product conforms to the essential requirements of the Radio Equipment Directive 2014/53/EU in 

order to attain CE Marking.

 

The CE Marking is not a quality mark. Foremost, it refers to the safety rather than to the quality of a 

product. Secondly, CE Marking is mandatory for the product it applies to, whereas most quality markings 

are voluntary.

Marking: The product shall bear the CE mark.

 

 

15.21

You are cautioned that changes or modifications not expressly approved by the part responsible for 

compliance could void the user’s authority to operate the equipment.

 15.105(b)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant 

to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful 

interference in a residential installation. This equipment generates, uses and can radiate radio frequency 

energy and, if not installed and used in accordance with the instructions, may cause harmful interference 

to radio communications. However, there is no guarantee that interference will not occur in a particular 

installation. If this equipment does cause harmful interference to radio or television reception, which can 

be determined by turning the equipment off and on, the user is encouraged to try to correct the 

interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

 

1) this device may not cause harmful interference and

2) this device must accept any interference received, including interference that may cause undesired 

operation of the device.

For body worn operation, this device has been tested and meets FCC RF exposure guidelines when used 

with an accessory that contains no metal and that positions the handset a minimum of 5mm from the 

body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines.

The highest FCC SAR values:

● 

0.32 W/Kg(1g) (Body)

Manufacturer: Quanta Computer Inc.

211 Wen Hwa 2nd Rd., Kueishan, Taoyuan 33377, Taiwan

 

HDEY8002010-2B