ademco 201528100 Benutzerhandbuch
REQUIRED TOOLS AND SOFTWARE
36-00012-01
INNCOM e7
Installation Requirements
READ ME FIRST
Installation Requirements
READ ME FIRST
Required Installation Hardware:
•
Four #6/32, 1" Philip's Pan Head Screws
•
e7 Smart Wall Mounting Plate
•
e7 Power and HVAC signal Harness
•
Phillips Screw driver
•
Wire cutters / strippers
•
Orange wire nuts
Optional Installation Hardware:
•
e7 Spacer Ring
•
3 wires for low voltage / S5bus in-room communications (typically CAT-5 or CAT-3 wiring)
•
Door, window, balcony switch and harness (wired to H2); see property specific documentation for
remote door, window and balcony switch requirements
•
Remote thermistor (04-1096.FL, wired to H2)
Required Installation Software
DO NOT THROW THIS UNIT AWAY: One PC-503 USB Commissioning Tool and USB cable per property /
project is shipped to the site.
project is shipped to the site.
This tool is used in conjunction with Honeywell's engINN commissioning software when advanced commissioning of
the e7 is required by a trained and certified INNCOM technician. DO NOT THROW THIS UNIT AWAY. Contact
Honeywell technical support for more information.
the e7 is required by a trained and certified INNCOM technician. DO NOT THROW THIS UNIT AWAY. Contact
Honeywell technical support for more information.
PC-503 USB Commissioning Tool and Cable