Murata Electronics North America 910M Benutzerhandbuch
WIT910
Protocol Modes Definitions
mode
00
Transparent mode used for point-to-point networks
or multipoint remotes; does not support any packet
types.
or multipoint remotes; does not support any packet
types.
mode
01
This is the simplest protocol mode supporting Data
packets only. This mode is not recommended for
base radios. No
packets only. This mode is not recommended for
base radios. No
CONNECT
or
DISCONNECT
packets are supported and no sequence numbers are
provided.
provided.
packet
types
supported:
Data
mode
02
This mode includes notification when remotes are
registered or dropped through
registered or dropped through
CONNECT
and
DISCONNECT
packets that are sent to the user
application at the base station and at the remote. No
sequence numbers are provided.
sequence numbers are provided.
packet
types
supported:
Data
CONNECT
DISCONNECT
modes
03
–
08
reserved for future use.
mode
09
This mode sends the protocol mode 01 packets
during transmit but receives data transparently.
during transmit but receives data transparently.
mode
0A
This mode sends the protocol mode 02 packets
during transmit but receives data transparently.
during transmit but receives data transparently.
modes
0C
–
0F
reserved for future use.
mode
11
This mode sends data transparently but supports
protocol mode 1 during reception.
protocol mode 1 during reception.
mode
12
This mode sends data transparently but supports
protocol mode 2 during reception.
protocol mode 2 during reception.
© 2000- 2004 Cirronet™ Inc
13
M-0910-0000 Rev -