Murata Electronics North America Z2430A Benutzerhandbuch
ZMN2405/ZMN2405HP Dev Kit
© 2007-2008 RFM Inc.
19
M-2405-0000 Rev. C-
If you want to send text messages back and forth between radios, a second serial port – either
RS232 or USB – is needed on the computer or a second computer is needed. Two Zigbee USB
devices cannot be attached to the same PC. This is due to the USB drivers. Click on the Serial
Comm button in the lower right hand corner of the ZBDemo main screen and the String
Messaging Demo box will open.
RS232 or USB – is needed on the computer or a second computer is needed. Two Zigbee USB
devices cannot be attached to the same PC. This is due to the USB drivers. Click on the Serial
Comm button in the lower right hand corner of the ZBDemo main screen and the String
Messaging Demo box will open.
There are four fields/windows in this box: the Destination Address window top left of the box, the
Incoming Data field top right of the box, the Messaging Display window in the middle of the box;
and the Text to Send window at the bottom of the box. The Clear button allows you to clear the
contents of the messaging display window.
To send a text string to the other radio, simply click on the Send button which will send the text
entered in the Text to Send field to the other radio. Data sent by the local radio will appear in the
messaging display window indicating what the Local radio transmitted as shown below.
Incoming Data field top right of the box, the Messaging Display window in the middle of the box;
and the Text to Send window at the bottom of the box. The Clear button allows you to clear the
contents of the messaging display window.
To send a text string to the other radio, simply click on the Send button which will send the text
entered in the Text to Send field to the other radio. Data sent by the local radio will appear in the
messaging display window indicating what the Local radio transmitted as shown below.