Wacom DTH1320 Benutzerhandbuch

Seite von 11
1
1
Important Product Information
(DTH-1320/DTH-1620)
Wacom Cintiq Pro
PRECAUTIONS
PRECAUTIONS ON USE AND HANDLING
To ensure the safe operation of the product, be sure to follow all instructions, 
cautions, and warnings found within this guide. Failure to do so could cause 
damage to the product , damage to your computer, or loss of data. Failure to do 
so could also void your warranty, in which case Wacom shall have no 
responsibility to repair or replace the product.
PHYSICAL LOCATION
WARNING
The product is solely for normal office environments but may be used also as 
center consoles in climate controlled environments. The product was tested by 
Wacom for the usage in a normal office environment only and there was no 
particular inspection with regards to its compatibility in medical and military 
application areas.
In addition, the interactive product is neither waterproofed nor explosion resistant.
It serves and can be used solely as a passive display and input device.
In all applications that are not designated for its sole usage, no information on the 
functionality and possible malfunctions of the interactive product can be supplied 
due to inadequate execution of tests. The adoption of the interactive product in 
other application areas than normal office environments is at the user’s risk.
CAUTION
Temperature and humidity
• Operating temperature and humidity: 5°C to 35°C, 20% to 80% RH
• Storage temperature and humidity: -10°C to 60°C, 20% to 60% RH
Do not use or store the product where:
• Temperature changes are severe or exceed specifications (e.g. outdoors or 
inside a vehicle).
• The product and, the pen,  are exposed to direct sunlight or heat from an 
appliance, or are exposed to water or any other kind of liquid.
Do not use the product in a dusty environment; this may damage it.
USAGE
WARNING
Only use a power adapter specified for use with the product. If a different type of 
power adapter is used, the product will not work properly or may be damaged. 
Using a different type of power adapter also has the potential to result in fire. Use 
of a different power adapter will void your warranty.
Regularly remove dust build-up from the power plug. The addition of moisture, 
etc., to accumulated dust may create a fire hazard.
Do not damage, forcibly bend, or bundle the power cord. Do not place heavy 
objects on the cord or expose it to excessive heat. Ignoring this warning may 
result in fire, electrical shock, or product failure.
Do not connect or disconnect the power adapter with wet hands. Ignoring this 
warning may result in electrical shock or product malfunction.
Do not insert foreign material into the USB port, video connector ports, or any 
other opening of the product. If a metal object or foreign material is inserted into a 
port or other opening of the product, it may cause product malfunction, fire, or 
electrical shock.
CAUTION
Do not connect or disconnect the cable or power cables while the product or your 
computer is turned on; this may damage the display or computer video card. In 
this case, Wacom shall have no responsibility to repair or replace the product.
The product is for use with HDMI. Using an inappropriate HDMI cable may 
damage the product.
Set up the AC adaptor and the product in a well-ventilated place. If used in a 
poorly ventilated place it may overheat and cause it to malfunction, decreasing 
the product life cycle.
When not using the product for long periods of time, unplug the power adapter 
from the AC outlet.
Take care of the following points to protect the health of your eyes when using the 
product:
• When using the product, only use it in a well lit room and view the display from 
a suitable distance.
• Take regular breaks when using the product for extended periods of time.
Take care of the following points in regards to the LCD display.
Do not push down forcibly with the pen on the LCD display. Pushing down 
forcibly on the display may cause ripple like striped patterns to temporarily 
appear on the display (the ripples disappear when you stop pushing down with 
the pen). The following conditions are characteristics of LCD displays and do not 
indicate damage or malfunction to the product.
• Depending on the displayed contents, uneven brightness may be produced.
• Depending on the displayed contents, a small portion of lit and unlit red or 
blue dots may be visible.
• When displaying objects with delicate patterns, flicker or striped patterns may 
be produced.
• After displaying the same still image for an extended period of time, a residual 
image may be produced. (Residual images will gradually disappear over time.)
• Changes to the condition of the back light over the period of using the display 
will gradually affect the condition of the display.
• Depending on the angle that from which the display is viewed, the colors and 
hues may appear changed.