Wacom PTKL Benutzerhandbuch

58

58

1.

With the D

IAGNOSTICS

 dialog box open, observe the T

ABLET

 I

NFO

 column as you test the tablet Touch 

Ring.  If you have more than one tablet connected to your system, be sure you have selected the tablet 
you are testing from the T

ABLET

 I

NFO

 column.

2. Slide your finger around the entire circumference of the Touch Ring.  As you touch and move your finger 

along the Touch Ring, a number will indicate the current finger T

OUCH

 R

ING

 position.

3. Press the Touch Ring toggle button to toggle between the four customizable states.  As you cycle 

between settings, a corresponding LED should illuminate.

Note: If any of the functions are set to S

KIP

, the corresponding LED will be skipped in the toggle 

sequence.

4. When you are done, click on the C

LOSE

 button to exit the dialog box.

Important: Remember that some applications can override and control the Touch Ring functions.  
Consider closing any open applications except the Wacom Tablet control panel when testing the 
Touch Ring.  For details, see using applications integrated for tablet control.

1.

With the D

IAGNOSTICS

 dialog box open, observe the T

ABLET

 I

NFO

 column as you test each ExpressKey.  

If more than one tablet is connected to your system, be sure you have selected the tablet you are testing 
from the T

ABLET

 I

NFO

 column.

2. Test the keys on your tablet by clicking them one at a time.  Each time you press a key, its number will be 

displayed next to the L

EFT

 K

EYS

 category.

3. On the tablet itself, verify also that a tablet ExpressKeys icon is visible for each corresponding 

ExpressKey.

4. When you are done, click on the C

LOSE

 button to exit the dialog box.

Important: Remember that some applications can override and control the ExpressKey functions.  
Consider closing any open applications except the Wacom Tablet control panel when testing the 
ExpressKeys.  For details, see using applications integrated for tablet control.