Zebra Technologies Corporation MD-BTC2TY Benutzerhandbuch
QL 420 User’s Guide
13
continued on next page
2. Load the media:
Loading media from an internal supply. Refer to Figure 6.
Loading media from an internal supply. Refer to Figure 6.
• Pull the media supports apart, insert the roll of media be-
tween them, and let the media supports close. Insure that
the media pulls off the core in the direction shown in Fig-
ure 6. The supports will adjust themselves to the width of
the media, and the media should be able to spin freely on
the supports.
the media pulls off the core in the direction shown in Fig-
ure 6. The supports will adjust themselves to the width of
the media, and the media should be able to spin freely on
the supports.
Media Roll
Note direction
media pulls off the
roll.
media pulls off the
roll.
Pull Media Supports
apart.
apart.
F
IGURE
6: I
NSTALLING
M
EDIA
IN
THE
QL 420