Zebra Technologies Corporation MD-ZBR5MZ Benutzerhandbuch
1. Install the MLB in printer housing. Tighten the screw highlighted in red (see figure 1).
Figure 1
2. On the print head/radio module chassis, install coaxial cable as shown in figure 2 and move it away from the
motor as shown in figure 3.
Figure 2 Figure 3
3. Pull the coaxial cable from the bottom of chassis so that the open end of the cable comes out from bottom side
of radio module. See figures 4 and 5 for details.
Figure 4 Figure 5