Zebra Technologies Corporation MD-ZLAN11G Benutzerhandbuch
Routine Maintenance
Cleaning the Media Path
Cleaning the Media Path
44
61207L-001 Rev. A
HC100 User Guide
4/23/08
Cleaning the Media Path
For best results, clean the media path after each cartridge of media. You can clean the media
path using a cleaning card or using a swab.
path using a cleaning card or using a swab.
Using a Cleaning Card
For cleaning cards, order part number 61097M. For ordering information, see Contacts
To clean the media path using a cleaning card, complete these steps:
1.
Press
EJECT
, and then remove the media cartridge from the printer.
2.
Turn off (O) the printer power.
3.
Remove the cleaning card from its packaging.
4.
Insert the cleaning card into the media chute as shown.
5.
Press and hold
EJECT
.
6.
Turn on (I) the printer power.
7.
Hold
EJECT
for approximately 15 seconds while the printer powers up and performs a
self-test.
8.
Release
EJECT
when the cleaning card begins moving.
The printer uses the cleaning card to clean the media path.