Zebra Technologies Corporation MD-ZLAN11G Benutzerhandbuch

Advanced User Information
Setting, Changing, and Restoring Print Server Settings

61207L-001 Rev. A

HC100 User Guide

4/23/08

Select the Method to Obtain an IP Address
This parameter tells if the user (permanent) or the server (dynamic) selects the 
IP address. If a dynamic option is chosen, this parameter tells the method by 
which the print server (wired or wireless) receives the IP address from the server.

Selections: ALL, BOOTP, DHCP, DHCP AND BOOTP, PERMANENT

Default Value: All

Corresponding ZPL Command: ^ND, ^NS (wired), or ^WI (wireless)

Corresponding SGD Command: internal_wired.ip.protocol (wired) 
or wlan.ip.protocol (wireless)

Located on Web Page: TCP/IP Settings

View or Change the Subnet
This parameter can be modified only when PERMANENT is selected for 
IP PROTOCOL.

Selections: 0 to 255 for each field

Default Value: 255.255.255.0 

Leading zeroes are not shown in the address.

Corresponding ZPL Command: ^ND, ^NS (wired), or ^WI (wireless)

Corresponding SGD Command: internal_wired.ip.netmask (wired) or 
wlan.ip.netmask

 (wireless)

Located on Web Page: TCP/IP Settings

View or Change the Gateway
This parameter can be modified only when PERMANENT is selected for 
IP PROTOCOL.

Selections: 0 to 255 for each field

Default Value: 0.0.0.0 

Leading zeroes are not shown in the address.

Corresponding ZPL Command: ^ND, ^NS (wired), or ^WI (wireless)

Corresponding SGD Command: internal_wired.ip.gateway (wired) or 
wlan.ip.gateway

 (wireless)

Located on Web Page: TCP/IP Settings