Zebra Technologies Corporation RFID-R170XI-02 Benutzerhandbuch
40
R110/R170XiIIIPlus User Guide
Print Modes
Select a Print Mode
Select a Print Mode
The options on your printer may let you set up additional print modes. Use the front panel
controls to set up the printer to the print mode that you wish to use.
controls to set up the printer to the print mode that you wish to use.
The following are the available print mode selections:
• Tear-off
• Peel-off
• Cutter
• Rewind
• Applicator (used only if a machine will apply printed labels to something)
• Peel-off
• Cutter
• Rewind
• Applicator (used only if a machine will apply printed labels to something)
To select a print mode, complete these steps:
1. From the front panel, press SETUP/EXIT.
2. Press NEXT/SAVE until the LCD reads
2. Press NEXT/SAVE until the LCD reads
PRINT MODE
.
3. Use the right or left oval to scroll though the choices. Be sure to select a print mode that
your hardware supports—some of the selections displayed are for optional printer
features.
features.
4. To save your selection, press SETUP/EXIT.
Tear-Off Mode
See
to set up labels in Tear-Off Mode.