Zebra Technologies Corporation RFID-Z4M-01 Benutzerhandbuch
Printer Setup
Unpack and Inspect the Printer
R4Mplus User Guide
9
Unpack and Inspect the Printer
• Check all exterior surfaces.
• Raise the media access door and inspect the media compartment.
• Save the carton and all packing material in case the printer needs to be shipped. Contact
• Raise the media access door and inspect the media compartment.
• Save the carton and all packing material in case the printer needs to be shipped. Contact
your authorized Zebra reseller for instructions.
• Depending on how your printer was ordered, a power cord may or may not be included. If
one is not included, or if the one included is not suitable for your requirements, see
Report Damage
If you discover shipping damage:
• Immediately notify the shipping company and file a damage report.
• Keep the carton and all packing material for inspection.
• Notify your local Zebra reseller.
• Notify your local Zebra reseller.
Storage
If you are not placing the printer into operation immediately, repackage it using the original
packing materials. The printer may be stored under the following conditions:
packing materials. The printer may be stored under the following conditions:
• Temperature: –40°F to 140°F (–40°C to 60°C)
• Relative humidity: 5% to 85%, non-condensing
• Relative humidity: 5% to 85%, non-condensing
Caution • For personnel and equipment safety, always use a three-prong plug with an
earth-ground connection to the AC power source.
earth-ground connection to the AC power source.
!
Important • Zebra Technologies Corporation is not responsible for any damage incurred
during the shipment of the equipment and will not repair this damage under warranty
during the shipment of the equipment and will not repair this damage under warranty