ZyXEL Communications Corporation EMG2881-T20A Benutzerhandbuch
Chapter 11 Maintenance
EMG2881-T20A User’s Guide
103
Figure 64 Maintenance > Backup/Restore
The following table describes the labels in this screen.
Note: If you uploaded the default configuration file you may need to change the IP address
of your computer to be in the same subnet as that of the default EMG2881-T20A IP
address (192.168.1.1). See
for details on how to set up your
computer’s IP address.
Table 46 Maintenance > Backup/Restore
LABEL
DESCRIPTION
Backup Configuration
Backup
Click Backup to save the EMG2881-T20A’s current configuration to your computer.
Restore Configuration
File Path
Click Choose File to browse to the location of the configuration file in your computer.
Upload
Click Upload to begin the upload process.
Note: Do not turn off the EMG2881-T20A while configuration file upload is in progress.
After you see a “configuration upload successful” screen, you must then wait one minute before
logging into the EMG2881-T20A again. The EMG2881-T20A automatically restarts in this time
causing a temporary network disconnect.
logging into the EMG2881-T20A again. The EMG2881-T20A automatically restarts in this time
causing a temporary network disconnect.
If you see an error screen, click Back to return to the Backup/Restore screen.
Reset
Pressing the Reset button in this section clears all user-entered configuration information and
returns the EMG2881-T20A to its factory defaults.
returns the EMG2881-T20A to its factory defaults.
You can also press the RESET button on the rear panel to reset the factory defaults of your
EMG2881-T20A. Refer to the chapter about introducing the Web Configurator for more
information on the RESET button.
EMG2881-T20A. Refer to the chapter about introducing the Web Configurator for more
information on the RESET button.