ZyXEL Communications Corporation VMG1312B10A Benutzerhandbuch

Chapter 32 Logs Setting

VMG1312-B10A User’s Guide

The following table describes the fields in this screen. 

An "End of Log" message displays for each mail in which a complete log has been sent. The 
following is an example of a log sent by e-mail.

• You may edit the subject title.
• The date format here is Day-Month-Year.
• The date format here is Month-Day-Year. The time format is Hour-Minute-Second.

Maintenance > Logs Setting

Syslog Setting

Syslog Logging

The Device sends a log to an external syslog server. Select Enable to enable syslog logging. 

Mode

Select the syslog destination from the drop-down list box. 

If you select Remote, the log(s) will be sent to a remote syslog server. If you select Local 
File, the log(s) will be saved in a local file. If you want to send the log(s) to a remote syslog 
server and save it in a local file, select Local File and Remote.

Syslog Server

Enter the server name or IP address of the syslog server that will log the selected categories 
of logs. 

UDP Port

Enter the port number used by the syslog server.

E-mail Log Settings

Mail Server

Enter the server name or the IP address of the mail server for the e-mail addresses 
specified below. If this field is left blank, logs and alert messages will not be sent via E-mail. 

System Log 
Mail Subject

Type a title that you want to be in the subject line of the system log e-mail message that 
the Device sends. 

Security Log 
Mail Subject

Type a title that you want to be in the subject line of the security log e-mail message that 
the Device sends. 

Send Log to

The Device sends logs to the e-mail address specified in this field. If this field is left blank, 
the Device does not send logs via E-mail. 

Send Alarm to

Alerts are real-time notifications that are sent as soon as an event, such as a DoS attack, 
system error, or forbidden web access attempt occurs. Enter the E-mail address where the 
alert messages will be sent. Alerts include system errors, attacks and attempted access to 
blocked web sites. If this field is left blank, alert messages will not be sent via E-mail. 

Alarm Interval

Specify how often the alarm should be updated.

Allowed 
Capacity Before 
Email 

Set what percent of the Device’s log storage space can be filled before the Device sends a 
log e-mail. 

Clear log after 
sending mail

Select this to delete all the logs after the Device sends an E-mail of the logs.

Active Log and Alert

System Log

Select the categories of system logs that you want to record.

Security Log

Select the categories of security logs that you want to record.

Send 
immediate alert 

Select log categories for which you want the Device to send E-mail alerts immediately. 

Apply

Click Apply to save your changes.

Cancel

Click Cancel to restore your previously saved settings.