ZyXEL Communications Corporation WRE6505 Benutzerhandbuch
Chapter 11 System
WRE6505 User’s Guide
66
The following table describes the labels in this menu.
11.4 System Password Screen
Use this screen to set the web configurator password. Click Maintenance > System. The following
screen displays.
screen displays.
Figure 51
Maintenance > Password
The following table describes the labels in this screen.
11.5 Firmware Upgrade Screen
Find firmware at
www.zyxel.com
in a file that (usually) uses the system model name with a “*.bin”
extension, e.g., “WRE6505.bin”. The upload process uses HTTP (Hypertext Transfer Protocol) and
may take up to two minutes. After a successful upload, the system will reboot.
may take up to two minutes. After a successful upload, the system will reboot.
Click Maintenance > Firmware Upgrade. Follow the instructions in this screen to upload
firmware to your WRE6505.
firmware to your WRE6505.
Table 26
Maintenance > General
LABEL
DESCRIPTION
System Name
Type the name used to designate the system.
Domain Name
Type the domain name used to designate the system.
Apply
Cancel
Table 27
Maintenance > System > Password
LABEL
DESCRIPTION
Old Password
Type the default password or the existing password you use to access the system in this
field.
field.
New Password
Type your new system password (up to 30 characters). Note that as you type a
password, the screen displays an asterisk (*) for each character you type.
password, the screen displays an asterisk (*) for each character you type.
Retype to Confirm
Type the new password again in this field.
Apply
Click Apply to save your changes back to the WRE6505.
Reset
Click Reset to begin configuring this screen afresh.
Cancel