MAG Technology Co Ltd U5013 Benutzerhandbuch

8     EV500 User’s Guide

Starting the monitor

1. Press the power button once.  The power LED lights and the

monitor demagnetizes itself for about five seconds.

During this time, the monitor generates a strong magnetic field.
This field can erase or seriously affect data stored on magnetic
tapes or diskettes that are stored or placed next to the monitor.

2. Turn on the computer.

3. Once the system is running, the power LED on the monitor

should be green. If not, check the connections and refer to the
“Troubleshooting” section of this guide..

4. Adjust the controls to get the best picture.  Experiment with the

display settings to choose the ideal image size and position for
you. Go to the “Adjusting display setting” section in this guide for
information about changing your display.

If you need to disconnect the power cord from either the wall
socket or monitor, wait 30 seconds after you turn off the
monitor before you unplug it. Wait 30 seconds lets the monitor
discharge any static electricity from the screen surface so you
will not get any static shocks.

EV500-u5.p65

1999/9/16, PM 05:41

8