L3 Technologies AFIRS228S Benutzerhandbuch
AFIRS 228S Iridium Global Communications System Installation Manual
16 July 2014
L-3 Aviation Recorders Proprietary
Page 50
165E5733-00 Rev. 03
7. SATCOM SYSTEM CONFIGURATION
The Iridium SATCOM System Satellite Data Unit (SDU) is configured via the Maintenance Port
Ethernet connection, using a laptop, web browser, and the AFIRS Maintenance User Interface (MUI).
Ethernet connection, using a laptop, web browser, and the AFIRS Maintenance User Interface (MUI).
Note:
The MUI only accepts English-language characters and numbers.
The MUI only accepts English-language characters and numbers.
IMPORTANT:
This manual provides information on how to connect to the Maintenance Port and access the
Maintenance User Interface (MUI), as well as general information on the steps required to configure
and update the Iridium SATCOM System.
This manual provides information on how to connect to the Maintenance Port and access the
Maintenance User Interface (MUI), as well as general information on the steps required to configure
and update the Iridium SATCOM System.
An RJ-45 Maintenance Port jack is located behind the access door on the front panel of the SDU.
Figure 7-1 – Maintenance Port Location
Note:
Upon initial configuration of an installed system, perform and complete the Before Power-On Tests
in Section 8.1, before applying power to the Iridium SATCOM System.
Upon initial configuration of an installed system, perform and complete the Before Power-On Tests
in Section 8.1, before applying power to the Iridium SATCOM System.