Digigram PCXES Benutzerhandbuch
D i g i g r a m
10
HOW TO CHECK THE
INSTALLATION
INSTALLATION
Once driver and card installed according to the procedure described in this
manual, you can verify that the card works correctly as follows:
manual, you can verify that the card works correctly as follows:
•
Menu <Start>, <Settings>, <Control panel>, <Sound and
Multimedia>, tab “Audio”, <Default device> (Playback device,
Recording device). Pull-down menus allow for the card’s DirectSound
devices as declared during installation (e.g. “LX6464ES -01 (WDM)” by
default for the card’s first stereo channel). The card can be used with any
DirectSound application (see pages hereafter).
Multimedia>, tab “Audio”, <Default device> (Playback device,
Recording device). Pull-down menus allow for the card’s DirectSound
devices as declared during installation (e.g. “LX6464ES -01 (WDM)” by
default for the card’s first stereo channel). The card can be used with any
DirectSound application (see pages hereafter).
•
If the ASIO option has been selected during installation, the card is
visible through any ASIO compliant application.
visible through any ASIO compliant application.
If the card is not displayed:
•
Make sure that the box “Drivers for the LX6464ES board” is checked
in the “Select components” window.
in the “Select components” window.
•
make sure that the card is correctly inserted in the PCI slot, and screwed
on the PC chassis.
on the PC chassis.
•
if necessary, uninstall the driver as described in this manual, and re-
install it.
install it.