Motorola Mobility LLC T56LV3 Benutzerhandbuch

 HTM1200 

HSPA 

Data 

Card User Manual 

When the driver is installed host boot service starts automatic. The service is called Moto 

Connect Card Service. Hostboot service is installed at C:\Program 

Files\Motorola\MCC\HostBoot.  

 

 

Dial up networking can be used to setup live network connection. 

 

Open device manager, right click on Motorola 3G HTM1000 Modem under modems and 

choose properties. Click on ‘Advanced’ tab and enter the initialization command:  

AT+CGDCONT = 1,”IP”,”APN”.  Where APN is the access point name. APN 

information must be obtained from the carrier that is supplying SIM card. Then click 

on ’OK’ on the window to save settings. 

 

 

 

By default the radio is turned off (Airplane Mode).  Radio can be turned on by sending an 

AT command to the Modem.  Open HyperTerminal and connect to the modem using 

Modem port. To turn ‘ON’ the radio send AT command AT+CFUN=1. This will enable 

radio. If an LED is connected to WWAN_LED pin, LED will turn ON when the radio is 

turned ‘ON’; this is an indication to ensure that the radio is ON. 

  

Page 20 of 30