Proview Electronics Co Ltd 998A Benutzerhandbuch

   

Follow the steps below to connect these cable

a.  Plug the 15-pin monitor signal cable into the video signal connector located at the

rear of the system, and lock the two screws to ensure firm grounding.

b.  This monitor is equipped with a universal power supply (100-240V).  Please plug

power cord into the power supply of PC or into the well outlet of the power. A three-

wire cord is provided as a safety precaution to ensure proper electrical grounding.

a.  Connect one end of the microphone cable to the connector on the back of the

Monitor and the other end to the sound card of computer.

b.  Connect two of the speaker cable to each side of speakers connector of monitor and

the third speaker cable to the sound card of computer.

c.  DC15V output: (On the back of the monitor or right side of the monitor) The DC

15V/250mA output provides power only for multimedia speaker. To connect the DC

15V output from monitor to speaker sets.

  

NOTE: How to attach and connect the optional speakers to your monitor. Please refer

to the user’s manual of speaker.

This button is used to turn the monitor on and off.

This indicator lights up green when the monitor operates normally. If the monitor

is in DPMS (Energy saving) mode (stand-by/suspend/Power off), this indicator

color changes to orange.

1. When turn the knob clockwise to increase or counter clockwise to decrease the

volume up and down. (only for one key model)

2. 

Volume mute: This control turns the speakers and headphone terminal sound

ON or OFF.

    Please following the procedure of selection and adjusting an item using the

    OSD system as below steps for main functions adjustment.

  

WARNING : Please be sure the AC power to your computer is" OFF "
before connecting or disconnecting any display peripheral, Failure to do so
may cause serious personal injury as well as permanent damage to your
computer equipments.

      VOLUME

  50

  VOLUME  MUTE