AVID ID Systems Inc. 125-AV1043-B Benutzerhandbuch
4. Battery: The reader is powered by one 9 volt battery. An alkaline battery is recommended for a longer battery life.
The battery is located in the battery compartment on the lower backside of the reader. To replace the battery, slide the
cover straight off, secure it, by sliding the cover back to its original position making sure the wires are securely inside the
compartment.
The battery is located in the battery compartment on the lower backside of the reader. To replace the battery, slide the
cover straight off, secure it, by sliding the cover back to its original position making sure the wires are securely inside the
compartment.
5. Bluetooth wireless technology:
This reader can wirelessly send the text of the microchip it reads directly to a Bluetooth enabled
device version 4.0 and above.
device version 4.0 and above.
In Bluetooth nomenclature, that smart phone, tablet, or computer is a central device, and the Avid
reader is a peripheral.
reader is a peripheral.
No special software or driver is required on the central device. Central devices that have had
Bluetooth added by using an additional card or USB dongle may need a driver for that board or
dongle, but there is nothing additional required to support the Avid reader.
Bluetooth added by using an additional card or USB dongle may need a driver for that board or
dongle, but there is nothing additional required to support the Avid reader.
Using the Bluetooth feature
Once the reader is connected and paired with your central device, put the cursor on the central
device screen where you want the microchip number typed in. Read the microchip with the reader.
device screen where you want the microchip number typed in. Read the microchip with the reader.
The microchip number will appear on the central device as though the number had been typed in
from a U.S. English keyboard.
from a U.S. English keyboard.
If the central device's soft keyboard isn't present, turn the reader off, and the cursor should reappear,
allowing you to use the soft keyboard.
allowing you to use the soft keyboard.
Powerup message
When the reader is turned on, it will display "
AVID <
UNIQUE> < MODE>". <UNIQUE> represents six
alphanumeric characters identifying each reader. <MODE> represents one of the modes NONE,
ENTR, TAB, OFF. In a central device's list of Bluetooth peripherals, the reader should show up as "
ENTR, TAB, OFF. In a central device's list of Bluetooth peripherals, the reader should show up as "
AVID <
UNIQUE>".
Changing modes
The reader comes with a special credit-card sized electronic tag labeled “Mode Change Card ” When
this tag is read by the reader, it will change the mode and display the new mode on the LCD.
this tag is read by the reader, it will change the mode and display the new mode on the LCD.
Reading this tag will cycle the MT3-B display through:
AVID <UNIQUE> NONE -- Sends no key after tag number
AVID <UNIQUE> ENTR -- Sends Enter key after tag number
AVID <UNIQUE> TAB -- Sends Tab key after tag number
AVID <UNIQUE> OFF -- Forgets any pairing. Doesn't send tag data
AVID <UNIQUE> ENTR -- Sends Enter key after tag number
AVID <UNIQUE> TAB -- Sends Tab key after tag number
AVID <UNIQUE> OFF -- Forgets any pairing. Doesn't send tag data
Copyright 2016 © Avid Identification Systems, Inc.
3
MT3_ Wand Reader with Bluetooth Manual - 4-19-17 AS1
- 4/25/17