Chic Technology Corporation RML425 Benutzerhandbuch

Adjust the two-channel switch inside the battery compartment to eit

her 

channel 1 or 2 to select the mouse channel.

1 Turn on your computer.
2 Press the ID link button on the receiver. There will be a 15-second 

delay while the receiver links to the mouse. 
Within that 15-second delay, press the ID link button on the 
mouse to complete the linking process. The LED indicator on the 
receivers changes from flashing to green.
The mouse is designed with Smart Link. After the linkage 
procedure is complete, you don’t have to re-link the mouse, even if 
you change batteries or restart the computer.

3 If the mouse does not link with the receiver, repeat the ID linking 

process in Step 2.

4 If there is interference when using the mouse with the selected 

channel, change the mouse channel and repeat Step 2. There are 
256 changeable IDs for a single channel.

1 Remove any existing mouse drivers completely.
2 Insert the driver CD in your computer, then select the mouse driver 

to be installed.

3 Select a language for installation.

The operating system automatically installs the driver through 
auto-install.

4 Restart the computer. 

A Mouse icon will appear on the Windows task bar after you 
successfully finish the installation.

1 Click the Add/Remove Programs icon in the Control Panel or 

click the Uninstall icon in the mouse folder under Programs on 
Start on the Windows desktop to remove the mouse software 
from your computer. 

2 Select the mouse software installed and click the Remove button.

A programmable key on the mouse allows you to set a number of mouse 
properties.

1 Double-click the Mouse icon on the Windows task bar. A mouse 

programming screen displays.

2 Follow the instructions in the dialog boxes to set the mouse 

properties.

The following mouse properties can be set:

Channel switch

DX-LM100_finalDTP_press.fm  Page 3  Friday, March 31, 2006  7:50 PM