Garmin International Inc 0112901 Benutzerhandbuch
nüvi 800 Series Owner’s Manual
G
ettinG
S
tarted
DRAFT
Cradle
Power cable
Suction cup mount
Check your state and local traffic laws before mounting. Currently, state laws in
California and Minnesota prohibit drivers from using suction mounts on their
windshields while operating motor vehicles. Other Garmin dashboard or friction
Step 1: Mount the nüvi
1. Plug the vehicle power cable into the power
connector on the right side of the cradle.
2. Snap the cradle onto the suction cup arm.
3. Clean and dry your windshield and the
3. Clean and dry your windshield and the
suction cup with a lint-free cloth. Remove the
clear plastic from the suction cup. Place the
suction cup on the windshield.
4. Flip the lever back, toward the windshield.
5. Fit the bottom of your nüvi into the cradle.
6. Tilt the nüvi back until it snaps into place.
7. Plug the other end of the vehicle power cable
5. Fit the bottom of your nüvi into the cradle.
6. Tilt the nüvi back until it snaps into place.
7. Plug the other end of the vehicle power cable
into a power outlet in your vehicle. Your unit
should turn on automatically if it is plugged in
and your vehicle is running.
8. If you are using a traffic receiver in Europe,
secure the traffic receiver’s antenna to the windshield using the suction cups.