Garmin International Inc 01364 Benutzerhandbuch
Mount Your zūmo in an
Automobile
1. Pull back the weather cap from the mini-
USB connector located on the back of
your zūmo.
2. Plug the vehicle power cable into the
mini-USB connector.
3. Snap the cradle onto the suction cup
arm.
Cradle
Lever
Suction cup
arm
4. Remove the clear plastic from the suction
cup. Clean and dry your windshield and
the suction cup with a lint-free cloth.
5. Place the suction cup on the windshield.
6. Flip the lever back, toward the
6. Flip the lever back, toward the
windshield.
7. Fit the bottom of your zūmo into the
cradle.
8. Tilt the zūmo back until it snaps into
place.
9. Plug the other end of the vehicle power
cable into a power outlet in your vehicle.
Your zūmo should turn on automatically if
it is plugged in and the vehicle is running.
Mount Your zūmo on the
Motorcyle
‹
Warning
Incorrectly wiring the power cable with
bare wire leads can result in damage to the
vehicle or the battery and can cause bodily
injury. Garmin strongly recommends having
an experienced installer with the proper
knowledge of electrical systems install the
unit.