Garmin International Inc 02047 Benutzerhandbuch

Â

*Latitude

Ã

*Longitude

Ä

*Time

Å

**Speed over ground (SOG) or course over ground (COG)

Æ

Soft-key functions change depending on your current activity

Ç

Working channel

*The latitude, longitude, and time appear when the radio has a GPS signal

acquired. You can enter data manually when the radio does not have a GPS

signal.
** The SOG and COG appear when the radio has a GPS signal acquired, and the

option is enabled in the menu.

Receiving an incoming signal

Transmitting

Transmitting at 25 W

Transmitting at 1 W

Saved channel

Local receiver mode, often used in areas with radio frequency interference (harbors)

ATIS enabled

Position tracking enabled

Auto channel changing disabled

Incoming or missed DSC call

Weather alert

GPS signal acquired

Hold PWR.

Set the squelch level to MIN before you adjust the volume (optional).

Select VOL/SQ twice.
VOLUME appears on the screen.

Turn the dial to increase or decrease the volume.

You can adjust the sensitivity level of the squelch to filter out background noise.

When you increase the squelch level, you hear fewer weak background signals

when you are receiving.

Select VOL/SQ.
SQUELCH appears on the screen.

Turn the dial counter-clockwise until you hear audio.

Turn the dial clockwise until there is no background noise.

You can switch between the USA, International, or Canadian frequency bands.
NOTE: Not all frequency bands are available on all device models.

Select MENU > CHANNEL > FREQUENCY BAND.

Select a frequency band.

Quick Start Manual

3