MilDef Crete Inc. DR10 Benutzerhandbuch
Chapter Two - 19
Operating Information
12. Go to Control Panel > System and Security > Administrative Tools > Computer
Management > Disk Management.
13. Confirm in Disk Management that there is now a Hibernation Partition on the SSD with
the correct size specified earlier.
Management > Disk Management.
13. Confirm in Disk Management that there is now a Hibernation Partition on the SSD with
the correct size specified earlier.
14. Close Disk Management and restart the system for the BIOS to identify the existence of
the newly created hibernation partition for Intel Rapid Start Technology.
Testing the Intel Rapid Start Technology
the newly created hibernation partition for Intel Rapid Start Technology.
Testing the Intel Rapid Start Technology
15. Click the Windows Start button, and then click Sleep. This will put the system into S3
state.
16. Observe that the system will go into sleep mode, and then quickly wake up again before
going into sleep state again. This is normal behavior as the system first transitions into the
S3 state (per the OS), and then Intel Rapid Start will wake the system up and move it into
the S4 (Hibernate) state.
17. The system is now in the S4 state as it cannot be woken up using USB devices such as
USB keyboard or mouse.
18. Press the Power Button to resume the system.
19. Observe that the system resume time is as fast as a wake from S3 mode.
state.
16. Observe that the system will go into sleep mode, and then quickly wake up again before
going into sleep state again. This is normal behavior as the system first transitions into the
S3 state (per the OS), and then Intel Rapid Start will wake the system up and move it into
the S4 (Hibernate) state.
17. The system is now in the S4 state as it cannot be woken up using USB devices such as
USB keyboard or mouse.
18. Press the Power Button to resume the system.
19. Observe that the system resume time is as fast as a wake from S3 mode.
Note:
To cancel the Rapid Start Technology, enter into the BIOS to disable.