Charles Machine Works Inc The 2450GR Benutzerhandbuch
2450GR Operator’s Manual
Service - 43
As Needed
CMW
Load Software
System Requirements
Subsite Electronics recommends the Xplore tablet PC for optimum data processing with the 2450GR
Ground Penetrating Radar unit. If you decide to use a different PC it must have the following:
Ground Penetrating Radar unit. If you decide to use a different PC it must have the following:
•
Pentium processor > 1/5 GHz or Centrino > 900 Hz
•
Ethernet 100 Mbps card
•
Monitor resolution (color) > 800 x 600
•
Windows 2000 Professional (Service Pack 4) or XP Professional operating system
•
HDD > 6 G, shock-proof mounted on a gel support or equivalent
•
No firewall software protecting data exchanged on the Internet
•
CD drive and/or floppy
•
Weather resistant (>=IP54)
Install Software
The tablet PC shipped with the 2450GR is already configured with acquisition software. If it is necessary to
reinstall the software, follow the steps below:
reinstall the software, follow the steps below:
1. Insert USB flash drive into computer USB port.
2. Open USB port directory to view files stored on flash drive.
3. Locate and open the file 2450GRDuo.msi.
4. Follow the on-screen cues and select a TYPICAL installation.
5. When installation is complete, follow the on-screen cues and click the FINISH button.
Set IP Address
1. Navigate to the computer’s network connection setting window.
2. Disable any wireless connections already connected.
3. Navigate to the Ethernet connection properties window and enter the following information for the
Internet Protocol (TCP/IP) setting:
IP address: 192.168.200.150
Subnet mask: 255.255.255.0
Subnet mask: 255.255.255.0
4. Follow the cues to save new settings and to exit the settings window.
5. Restart the computer.