Universal Scientific Industrial Co. Ltd. BM6621R4 Benutzerhandbuch

 

 

2003/7/9

 

                                                                                                                                                     

 

 

15 

There’s 3 property pages in the 

 property sheet, which includes 

, 

, and 

 

In this page, user can configure the station card with its 
Network type (Infrastructure/Ad hoc), SSID (up to 32 
characters), channel (only in Ad hoc mode, and its range 
is according to the regulatory domain setting in the 
EEPROM), and the Desire Tx Rate (Automatic/ 1 Mbps/1 
Mbps/ 2 Mbps/ 5.5 Mbps/ 11 Mbps)   

Figure 1-3. General Settings

 

By choosing this option, you can set the card with its 
encryption mode to NONE or WEP, the authentication 
mode to Open system or Shared key or Auto Switch.                                                               

 

 

 

 

When set as WEP enabled, you have to set/complete the 
WEP key materials key material length and specify which 
one of them as the default key (1 to 4) correctly, which 
means 4 different keys should be in the same length or 
empty, and the default key radio button should be set to the 
set with non-empty key material. If the setting is not 
complete, the APPLY button will remain to be “gray” and 
cannot be clicked until user do correct settings of this page.

 

Choosing the Advanced option, you can change advanced 
configuration settings, such as the Power Saving mode, 
Preamble Type, Fragmentation Threshold, and RTS 
Threshold (See Figure 1-5). Figure 1-5 shows the 
recommended configuration for the advanced settings. 
Before selecting Short Preamble, make sure that the other 
stations and APs are also supporting this feature. 

Figure 1-5. Advanced Settings