Hobbico Inc TTX402 Benutzerhandbuch

Seite von 16
2
TTX402 TRANSMITTER (Tx)
The TTX402 4-Channel Micro airplane transmitter can be confi gured to operate 
as a 3-channel or 4-channel Tx. When confi gured for 4-channel operation the 
controls function like a normal Mode-2 transmitter with aileron + elevator on the 
right stick, and throttle + rudder on the left stick.
Confi guring the Tx for 3-channel operation can help beginners concentrate on 
throttle control with one hand and full airplane directional control with the other 
hand. Here, the right stick operates elevator + rudder while the left stick will control 
the throttle. The aileron function will still be active, and now be on the left stick, 
but aileron control is often not needed for 3ch aircraft. See the diagram above for 
details.
To change the TTX402 transmitter between 3ch and 4ch confi gurations:
1.  Turn off the Tx power switch.
2.  Move the right stick to the top-right corner, and the left stick to the top-left 
corner, and hold in these positions.
3.  Move the Tx power switch to the On position. The power LED will fl ash, 
accompanied by three short tones from the Tx which indicates the Tx 
confi guration has been changed.
Note that each time the Tx power switch is turned on you will hear either one short 
tone if the Tx is in the 3ch confi guration, or two short tones if the Tx is in the 4ch 
confi guration.
TACJ2402 Mnl.indd   2
TACJ2402 Mnl.indd   2
4/20/2011   9:51:26 AM
4/20/2011   9:51:26 AM